Skip to main content
Wongsaphat Puangsorn runs every show

A Unitree G1 humanoid, at your event

For events, exhibitions, universities and shoots. Every job starts with a conversation about your event, then an itemised quotation from us.

Unitree G1 walking forward between shelves of trophies, the ring on its visor lit blue
Our own G1 in a walking test by remote, Pathum Thani, November 2026. Video: Thaibotic

The G1 in numbers

  • Standing height

    1320mm

  • Weight with battery

    ~35+kg

  • Degrees of freedom per leg

    6

  • Quick-release battery

    9000mAh

Figures from unitree.com/g1, checked 5 October 2026. The full sheet and its sources are below.

What we can and can’t do yet

Wongsaphat Puangsorn, co-founder, operates the robot in person throughout the show, with its remote control on him.

A walking test by remote, in Pathum Thani, November 2026. Real speed. Video: Thaibotic
A real clip of the robot we bring, no sound

Can do

  • Check the date and venue you send us, with the deposit and payment terms set out in the quotation
  • Send an itemised quotation before every job

Can’t do yet

  • Routines programmed specially for your event
  • Unscripted conversation with guests through AI
  • Performing without an operator
  • Picking up or handing over items: its hands are fixed and can’t grip

Unitree G1 EDU specs

These are the specs of the G1 we bring to your event. Each figure comes from a source named under the tables, and Unitree notes that its figures can vary with the conditions of use and the robot’s configuration.

Unitree G1 standing straight on, head to shin, on a wooden floor with trophies behind it
Photo: Thaibotic, Pathum Thani, November 2026
Size and weight
Height × width × thickness (standing)1320 × 450 × 200 mm
Height × width × thickness (folded)690 × 450 × 300 mm
Weight with battery~35 kg+
Calf and thigh length0.6 m
Arm span~0.45 m
Movement
Total degrees of freedom29
Degrees of freedom per leg6
Waist degrees of freedom3
Degrees of freedom per arm (wrist included)7
Waist joint rangeZ ±155°, X ±30°, Y ±30°
Knee joint range0° to 165°
Hip joint rangeP ±154°, R −30° to +170°, Y ±158°
Wrist joint rangeP ±92.5°, Y ±92.5°
Torque and load
Maximum knee joint torque120 N·m*
Maximum arm load~3 kg†
Battery and charging
Battery life~2 h‡
Battery capacity (quick-release battery)9000 mAh
Lithium battery, cells in series13
Charger voltage54 V
Charger current5 A
Computing and sensors
CPU cores8
AI computing dock100 TOPS
SensorsDepth camera and 3D LiDAR
Audio and connectivity
Microphones (array)4
Speaker power5 W
WirelessWi-Fi 6 and Bluetooth 5.2
Internal components
Joint output bearingsIndustrial-grade crossed roller bearings
Joint motorsLow-inertia internal-rotor PMSM
Joint encodersDual encoders
CoolingLocal air cooling
WiringRouted through every joint’s hollow core

Sources: Unitree Robotics, unitree.com/g1 (checked 5 October 2026); STA Robotics, stabots.com, for the G1 EDU U2 build’s total degrees of freedom, waist degrees of freedom, degrees of freedom per arm and AI computing dock (checked 5 October 2026)

  1. * Unitree notes that the joint motors differ in maximum torque, and gives this figure for the largest of them.
  2. † Unitree notes that this changes a great deal with how far the arm is extended.
  3. ‡ Depends on movements, temperature and number of shows.
  • Close-up of the Unitree G1 head and shoulders: a dark visor framed by a blue light ring
    Photo: Thaibotic, Pathum Thani, November 2026
  • Close-up of the fixed black hand of the Unitree G1
    Photo: Thaibotic, Pathum Thani, November 2026
  • Close-up of the Unitree G1 hip and knee joints, seen from behind
    Photo: Thaibotic, Pathum Thani, November 2026

Real jobs with this robot

Related articles